One of the most common and trickiest questions regarding chainsaws is, are the chainsaw bars interchangeable? This is a dilemma you may face with chainsaws, and there is no correct answer to this question.
Yes, chainsaw bars are interchangeable, but it takes a lot of knowledge and professionalism to do it. The process is rather complicated, and a lot of key factors come into play.
Only chainsaw guide bars with a similar build design, chain grip, and gauge are typically interchangeable. Furthermore, within a common company’s saws and bars, many separate frames, grips, and gauges are used, rendering many guide bars unsuitable.
Read along to know more about chainsaw bars.
Table of Contents
- Factors That Determine the Interchangeable Facility of The Chainsaw Bar
- How long should a chainsaw bar last?
- Can you put a long bar on a chainsaw?
- Will any bar fit any chainsaw?
- What size chainsaw bar should I get?
- What is the difference between .325 and 3/8 chain?
- Can you run a chainsaw without the bar?
- Final Verdict
Factors That Determine the Interchangeable Facility of The Chainsaw Bar
Having a branded chainsaw will not necessarily provide you with all the features you require. Before investing in chainsaws, you must prioritize the features over brand names.
Examine the following factors to know if chainsaw bars are interchangeable.
Size of the bar
The size of the chainsaw bar is one of the major factors to consider. If you’re proceeding to use the same bar on two opposite chainsaws, you’ll need to make sure they’re identical in size. I repeat, that’s an absolute, no cutting corners here.
For the most part, you must evaluate this visibly, but you will ultimately need to quantify the bar on its own in both dimensions; length and width.
If the evaluated measurements don’t ring true, you wouldn’t be able to utilize the bar on that chainsaw. However, if the measurements do match up, then it’s one headache out of the way.
Next up on the line is the tensioner hole. This is a metal piece that you will require to adjust and alter the chain into the bar.
Ideally, the thickness of the chain and the tensioner hole must be equal.
Volt slot has features almost similar to the tensioner hole. It has one purpose to serve; to adjust the chain into the bar.
One of the most important features to look for is the oiler hole. Some modern chainsaws consist of an automated oiler hole. However, for some, you will need to add it manually.
Save the hassle and look for an automated oiler hole in your chainsaw. It may result in dishing out a few extra bucks, but it’s worth it.
Changing the bar
Ensure proper adjustment of the chain bar. You will need to be extra cautious at this step since loose-fitting may be hazardous.
If the chain bar is too loose or too tight, the equipment will break and stop functioning.
Changing the chain
There are two distinctive ways to change the chain; when you change the bar, the chain demands to be changed.
At first, you must ensure the chain bar and the sprocket is tightly bound. Next comes the volt slot. As mentioned previously, ensure that the drive link is properly adjusted to the volt slot.
A replacement chain will be needed if the size of your bar is extended or significantly reduced. This is relatively intuitive as the bar grows longer; you’ll require a bigger chain to loop over it.
Ensuring a precise measurement is very crucial before starting the interchanging process. The difference in width and length can bring about the doom of your chainsaw.
Changing the sprocket
A chainsaw sprocket is vital to the chainsaw’s efficiency. Rusted sprockets might significantly reduce the chainsaw’s efficacy and versatility. However, they also can cause damage to all other parts associated with it.
It gradually leads to a situation where they tend to weaken the drive links, which expand the bar groove and impact cutting, triggering a strain on all of your chainsaw’s components.
Too large or too small a size can become the reason behind equipment damage. Hence, maintaining a precise diameter is extremely important.
How long should a chainsaw bar last?
When used consistently, a chainsaw chain will last up to five years. A chain could last for decades for people who use it less frequently.
However, you cannot determine the chainsaw’s life expectancy by just looking at its expiration date. The usage and care of a chainsaw chain decide its lifespan and longevity.
Can you put a long bar on a chainsaw?
The motor capacity of the chainsaw has the greatest influence on the integrated size of chainsaw bars. In particular, the better the chainsaw’s strength, the bigger the guidance bar it can hold.
Furthermore, another point to consider would be; the sawing efficiency of the chainsaw will reduce as the size of the bar is increased. When you get relatively close to the edge of the bar spectrum, you can predict your chainsaw to cut with minimal power.
It’s an exchange among both the chain’s width and the pressure exerted on it. Since you’re replacing chainsaw parts, it’s essential to understand and follow manufacturer guidelines.
Will any bar fit any chainsaw?
The answer to this question is pretty straightforward. No, any bar will not fit in any chainsaw. Chains are designed to match particular bars. If you attempt to loop a chain into an excessively small or a behemoth-like wide bar, your saw will not function.
Chainsaws come with a lot of risks. That’s why it’s important to pay attention to the specifications and utilize materials that are correctly sized.
What size chainsaw bar should I get?
The very first question you should think about is what you want to do with your chainsaw.
A rather strong chainsaw with a shortened bar will suffice if you are a laid-back user who only requires it for light projects such as cutting twigs or particular trimming work. Somewhere around 14″ will do the trick for this type of work.
Anything in the 16″-20″ range will be a reasonable choice if you require a chainsaw for moderate tasks, such as trimming shorter plants.
If you need a chainsaw for massive sawing, such as chopping down significantly bigger trees, a chainsaw with a diameter of 22″ or greater may be excellent.
Understand the type of work you’ll be doing with your chainsaw and pick one that’s right for you.
Quantify the circumference of the wood you’ll be cutting and add 2″ to get the finest bar length – and try to avoid purchasing a chainsaw that’s far larger than your requirements.
What is the difference between .325 and 3/8 chain?
While the 0.325 is shorter and quicker, it might not be the right option for your day-to-day tasks. The three-eighths-inch chain is more robust and has a comparatively longer lifespan.
As a result, it’s one of the most common adjustments among chainsaw owners who really want to extract the most out of their device.
Can you run a chainsaw without the bar?
It’s a terrible idea to run a chainsaw without the bar. It will break the chainsaw, and you’ll be caught in the aftermath as well. So, never run a chainsaw without the bar.
Since chainsaw bars bind to the chainsaw in various ways, they are not interchangeable. If you’re searching for a new bar, make sure it’s compatible with your particular chainsaw style.
To an extent, chainsaw bar dimensions are interchangeable. However, you must ensure that your chainsaw engine has adequate capacity to drag your chain all the way around the bar.
The various styles of chainsaw bars can be switched out if the base measurements are a perfect match. Weight, longevity, and value should be your primary concern once the measurements are compatible.
We hope this helped you understand all there is about chainsaw bars’ interchangeability.